Page | - 47 -
© Copyright Mastip Technology Limited. Information subject to alteration. V1.01 www.mastip.com
Temperature Controller METICOM CTI Series
Select a color you want to use as background of this gate, and then click [YES] to set the figures
and leave the screen.
●
Turn off or turn on this zone: touch [
OFF
] / [
ON
]
●
Set input filter: click the value to call up small keyboard.
●
Set input type: click the value to call up small keyboard.
●
Set time resolution: click the value to call up small keyboard, set 0.01, 0.1 or 1.
●
Select gate open/close trigger modes:
click the indicator of Time control or Screw control to select modes for T1~T4.
blue - unchecked,
green - checked
.
●
Set T1~T4: click the value to call up small keyboard.
●
Back to main interface: touch [
Exit
].
7.6 Preview the Setting
Touch [
Graph
] on the main interface, and then you can see the sequential chart of all gates
open/close setting. You can compare and confirm the setting.
7.7 Test
Touch on the main interface to simulate a start trigger, and then the controller will start a
complete gate open/close cycle.
Chapter 8 Run/Stop System
8.1 Run System
Touch [
Run
] on the main interface of temperature control or Sequential Valve Gate control to
run the system.
Temperature Control
All zones start to work in Auto mode (disable keep the data in system setting) or the mode before
power off (enable keep the data in system setting) except the module is turned off by zone setting.
●
You can touch [Standby]on the main interface to make all zones wok in Standby mode.