Page 29
GENERAL MAINTENANCE
WARNING Failure to unplug the saw
could result in accidental start up,
which may cause serious injury.
NOTE: Always wear gloves when
handling or working near blade which
located on the safety guard.
NOTE: Use only manufacturer’s
recommended replacement parts and
accessories.
Keep all nuts, bolts and screws tight to
be sure that the machine is in safe
working condition.
Examine the machine and replace worn
or damaged parts for safety
Removing and installing the saw blade
1) Lubrication
All of the bearings in this miter saw are
lubricated with a sufficient amount of high
grade lubricant for the life of the saw under
normal operating conditions. Therefore, no
further lubrication is required.
Some areas will require infrequent
lubrications. You will need to apply:
Automotive oil directly to the slide bars.
Light oil or pressurized light spray oil to
the arm pivot shaft.
Light oil or pressurized light spray oil to
the torsion spring.
2) Cleaning the Miter Saw
WARNING Failure to unplug the saw
could result in accidental start up,
which may cause serious injury.
NOTE: Wear safety glasses to
protect your eyes whilst cleaning.
NOTE: Always wear gloves when
handling or working near blade which
located on the safety guard.
Use a soft brush to remove any
accumulated sawdust.
Wipe down the miter saw enclosure with
a slightly damp cloth. Do not spray the
saw with water. Water contact may
destroy the switch and the electric
motor.
3) Storage
After cleaning the miter saw thoroughly,
store the saw in a dry room allow the
motor to cool down beforehand.
Store the miter saw out the reach of
children.
4) Transport
Use the original packaging to ship
whenever possible.
MAINTENANCE
