Master-force 240-0021, Руководство оператора

Страница: 15 / 32

Page 15
noted, secure the workbench to the
floor before operating.
NOTE: Many of the illustrations in
the manual show portions of this tool.
This is intentional so that we can
clearly show points being made in the
illustrations.
DUST EXTRACTION PORT
This miter saw comes with a dust bag to
help you keep the work area clean. The
dust bag is ideal for smaller jobs. The dust
port also accepts a standard 1 1/4”
vacuum hose for dust collection (Fig. 6).
SAW BLADE WRENCH
STORAGE
The storage area for the saw blade wrench
to change the blade is located in the back
of saw’s base (Fig. 7).
ADJUSTMENT LOCKING
LEVERS
The adjustment locking levers for sliding
fence and extension support arms are
designed to provide the needed leverage
to lock and unlock the controls easily.
These levers can be rotated and pulled
out, and rotated back without controlling
the adjustment and then pushed back in to
continue the locking or unlocking rotation.
Example for upper sliding fence
adjustment – to unlock:
Step 1: Rotate the lever approximately ½
turn to the left (counter-clockwise).
Step 2: Pull out the lever to disengage
from the locking bolt and then rotate
approximately ½ turn clockwise.
Step 3: Release the lever to re-engage
with the locking bolt and rotate
approximately ½ turn to the left (counter-
clockwise) to continue loosening the
locking bolt until the fence can slide.
Step 4: Slide the fence to desired position.
Step 5: Repeat the above steps in
opposite order to tighten the locking bolt.
BEVEL-LOCK LEVER
ADJUSTMENT
WARNING Before performing any
assembly or adjustment, always
disconnect from power source. Failure
to unplug your saw could result in
accidental starting causing serious
injury.
The bevel-lock lever will securely lock the
cutting head of saw at the desired bevel
angle. Press the lever down to lock the
cutting head and lift the lever up to unlock
the cutting head (Fig. 8).
1. Unplug the miter saw.
2. To lock the cutting head.
1. Press the left-side of locking ratchet
guide down.
2. Lift the bevel-lock lever and press
down to lock.
3. Several cycles may be required to
lock the cutting head firmly.
3. To unlock the cutting head.
1. Press the right-side of locking ratchet
guide down.
2. Press the bevel-lock lever down and
lift to unlock.
(Continued on page 16)
4 holes for mounting
FIG. 5
FIG. 6
FIG. 7
ASSEMBLY AND ADJUSTMENT