20
terminals. The small decoders come
pre-wired. Soldering is not required.
5.1 Basic factory default settings
This table shows the basic factory
default settings of the eMOTION S:
Basic settings sound decoder (S)
Locomotive address
3
Function voltages
22 Volt (full track power)
5V (A7+8)
Function output A1
Function key: F1
Function output A2
Function key: F2
Function output A3
Function key: F3
Function output A4
Function key: F4
Function output A7
Function key: F19
Function output A8
Function key: F14
function triggering
parallel only
Using the LGB® MTS I or MTS
II digital system (no parallel data
processing) CV 49 - Bit 0=1 must
be activated for serial function
triggering.
werden muss.
5.1 Wichtige Grundeinstellungen
Die Grundeinstellungen des
eMOTION LS Decoders sind wie
folgt:
Grundeinstellung der SoundDecoder (LS)
Lokadresse
3
Spannung Funktionen
22 Volt (max. Spannung)
5V (A7+8)
Funktionsausgang A1
Funktionstaste: F1
Funktionsausgang A2
Funktionstaste: F2
Funktionsausgang A3
Funktionstaste: F3
Funktionsausgang A4
Funktionstaste: F4
Funktionsausgang A7
Funktionstaste: F19
Funktionsausgang A8
Funktionstaste: F14
Funktionsauslösung
nur parallel
Bei Verwendung eines LGB® MZS I
oder II Digitalsystems (ohne paral-
lele Funktionsauslösung) muss die
serielle Funktionsauslösung mit CV
49 - Bit 0=1 aktiviert werden.