Masport UJ102, Руководство пользователя

Страница: 63 / 64

63
111
8
│
POST-SEASONAL MAINTENANCE, PUTTING THE MACHINE OUT OF
OPERATION
After the end of the season or if you will not be using your riding mower for more than 30 days, make sure to prepare your machine
for storage as soon as possible. If fuel remains in the petrol tank without movement for more than 30 days, a sticky deposit may
form, which can have a negative effect on the carburettor and cause poor engine operation. For this reason empty the petrol tank.
Never store the riding mower with a full petrol tank inside of buildings or poorly ventilated areas, where there are fuel
vapours, open flames, sparking or lighting flames, furnaces, central heating, dry rags, etc. Handle fuels and lubricants
with care, they are highly flammable and careless handling may lead to serious burns or damage to property.
Only empty the petrol tank into approved containers outdoors away from open flames.
Recommended procedure for preparing the riding mower for storage:

Thoroughly clean the entire machine, especially inside the mowing deck ( 6.2.2 ).
Never use petrol for cleaning. Use degreasing agents and warm water.

Repair and paint dinted places to prevent corrosion from occurring.

Replace faulty or worn out parts and tighten all loose nuts and bolts.

Prepare the engine for storage according to the user's manual for the operation and maintenance of the engine.

Lubricate all lubrication locations according to the lubrication diagram ( 6.4 ).

Release the V-belt driving the mowing deck (
6.3.8
)

Take out the battery, clean it, fill it up with distilled water all the way to the bottom parts of the rings of the filling openings and
charge fully. A battery that is not charged may freeze and crack. Store the battery in a cool, dry location, as necessary. Charge
the battery every 30 days and regularly check its voltage.

Store the riding mower covered in a clean and dry environment.
The best way to ensure the riding mower’s ideal operating condition for the next season is to have it inspected and tuned at an
authorised service centre every year.
112
9
│
DISPOSAL OF THE MACHINE
After the operational life of the machine is over, the owner of the machine is responsible for its disposal. This may be performed in
two ways:
a) Hand the machine over to a specialised company (scrap yard, secondary waste collection point, etc.). You will
receive documented confirmation of the handover for disposal.
b) Dispose of the machine yourself. In this case we recommend the following procedure:

Dispose of the product utilising recyclable material according to the applicable waste disposal law.

Disassemble the entire machine.

Parts that can be reused should be cleaned, preserved and stored for further use.

Separate the remaining parts into those that are and are not environmentally friendly, e.g. rubber parts
(gaskets), lubricant remains in the bearings or on gears. The environmentally harmful components must be
handled according to the relevant waste disposal law applicable in the country of the user, e.g. in the Czech
Republic it is the Waste Act No. 185/2001 Coll.

Sort the waste according to the Wastes Catalogue in accordance with the relevant ordinance. Ecologically
friendly waste shall be treated as reusable material.