Masport UJ102, Руководство пользователя

Страница: 29 / 64

29
77
2.3 | CHILD SAFETY
If the riding mower operator is not prepared for the presence of children then a tragic accident may happen. The movement of
a riding mower attracts the attention of children. Never assume that children will remain in the location where you last saw them.
! Do not allow children without supervision in areas where you are mowing grass.
! Always be prepared - if children approach you then turn off the machine.
! Before and while reversing look behind you and at the ground.
! Never transport children, they may fall and seriously injure themselves, or they may dangerously interfere with the riding mower
controls. Never allow children to operate the machine.
! Pay increased attention in places with limited visibility (near trees, bushes, walls, etc.).
2.4 | FIRE SAFETY
When reversing the riding mower it is necessary to adhere to fundamentals and regulations for work safety and fire protection
relating to work with this type of machine.
! Regularly remove flammable substances (dry grass, leaves, etc.) from the area around the exhaust, engine, battery and
anywhere, where they could come into contact with petrol or oil and subsequently catch on fire and so result in a fire on the
machine.
! Allow the riding mower engine to cool down before parking it in an enclosed location.
! Pay increased attention when working with petrol, oil and other flammable substances. These are very flammable substances,
the fumes of which are explosive. Do not smoke during this work. Never unscrew the petrol tank cap and refill with petrol while
the engine is running, if the engine is hot or if the machine is in a closed location.
! Check the petrol lines before using and do not fill the petrol all the way up to the bottleneck of the tank. The heat generated by
the engine, sun and the expansion of the fuel may lead to the petrol overflowing and a subsequent fire. For storing flammable
substances use containers designed for this purpose. Never store a canister with petrol or the machine inside a building near
any source of heat. Pay increased attention when working with the battery. The gas inside the battery is highly explosive,
therefore do not smoke in the vicinity of the battery and do not use an open flame so as to avoid serious injuries.
78
3
│
PREPARATION FOR PUTTING INTO OPERATION
3.1 | UNPACKING AND INSPECTING THE CONTENTS
The riding mower is supplied wooden crate cover. For transportation reasons some machine assemblies are disassembled at the
production plant and it is necessary to install them before putting the machine into operation. The unpacking and preparation for
operation is performed by the seller within the scope of the pre-sale service.
Inspect immediately after delivery that the packed machine has not been damaged. In the event of damage inform the carrier. If the
complaint is not lodged in time, no potential demands can be claimed.
Check that the machine model is the same as you ordered. In the event of an irregularity do not unpack the machine and immediately
report this discrepancy to the supplier.
In the packaging you will find:
3.1
(1) Crate cover
(2) Ramps (attention – these are not included!)
(3) Steering wheel
(4) Seat
(5) Documentation (5) (packed parts list, user’s manual for the riding mower, user’s manual for the engine,
user’s manual for the battery, service log book)
(6) The grass catcher (is partially disassembled in the cardboard box, with a hitch and joining material.
► UNPACKING
1. Using a suitable tool (e.g. crowbar or hammer, etc.) remove the crating ( 1 ), take out all the individually packed assemblies and
remove all reinforcing elements and packaging materials.
2. Visually inspect the machine for damage that may have occurred during transport. Also unpack all individually packed
assemblies and inspect them. In the event of any type of damage, immediately contact the supplier and do not continue with
the installation of the machine.
3. Prepare suitable ramps ( 3.1 position 2) to drive the machine from the pallet. If you do not use ramps there is a danger of
damaging parts of the machine.
4. Lift the mowing deck into the transport position by pulling the lever to the highest position ( 4.2). If you do not lift the mowing
deck, there is a risk of seriously damaging it.
3.2 | DISPOSAL OF PACKAGING MATERIALS
After unpacking everything, ensure that the packaging material is properly disposed of or recycled. The disposal must
conform to relevant waste disposal laws valid in the user’s country.
Disposal may be performed by a specialised company.
3.3 | ASSEMBLY OF THE SEPARATELY PACKED ASSEMBLIES
Due to the technical nature of this task the machine is prepared for operation by the seller of your riding mower (according to the
following instructions).
Before starting the installation, remove all covering protective materials, locate the riding mower on an even surface and align the
front wheels to face forward.