Masport UJ102 Скачать руководство пользователя страница 35

35

83

 OPERATING THE MACHINE

4.1 | LOCATION OF THE MAIN CONTROL ELEMENTS AND INDICATORS

4.1a

(1)  Throttle lever
(2)  Information panel (optional accessory)
(3)  AUT/MAN switch - control of the function of mowing when the grass catcher is full (optional accessory)
(4)  12V socket (optional accessory)
(5)  Deactivation of the mowing deck disengagement for reversing
(6)  Mowing deck activation switch
(7)  Main power switch
(8) Buzzer
(9)  Parking brake
(10) Cruise control (optional accessory)
(11) Choke
(12) Brake pedal and parking brake indicator light
(13) Differential lock pedal
(14) Brake pedal
(15) Mulching flap lever
(16) Reverse travel pedal
(17) Forward travel pedal
(18) Mowing deck elevation adjustment lever
(19) Mowing deck position lock lever
(20) Grass catcher dump lever handle

4.1a

(21) Bypass lever for the K62 transmission
(22) Bypass lever for the K46 transmission

84

4.2 | DESCRIPTION AND FUNCTIONS OF THE CONTROL ELEMENTS

(1) THROTTLE LEVER

Serves to regulate the engine speed. It has the following three positions:

CHOKE*

Starting a cold engine

MAX

Maximum engine speed

MIN

Minimum engine speed (idle)

*

 

Only on machines with a BS15, BS17, KO15, TE17 and HO16 engines

(2) INFORMATION PANEL 

(optional accessory)

The information panel contains indicator lights, that serve to signal the status of the machine’s basic functions.

Indicator light for the presence and full level of the grass catcher

It is lit:  

the grass catcher is not mounted on the machine

It is flashing:  the grass catcher is full of grass

Motor oil pressure

When oil pressure in the engine falls, the indicator light is lit red

P

Park brake and driving brake

When the brake pedal is pushed or the hand brake engaged, the indicator light 

is lit red

+

+

Charging the battery*

The colour of the indicator light changes depending on the battery voltage. It 

can have the following states:

-  permanently lit green = battery is OK (12.6 - 14 V) and is recharging 

correctly

-  quickly flashing red = low battery voltage (below 12.6 V)

-  slowly flashing blue = battery voltage is over 14 V

Fuel reserve

When the fuel level in the tank falls below 5 l the indicator light is lit orange

SenDEC

HOURS

8

Mode

Counter of motor hours** 

Displays the number of motor hours. Pressing the Mode button gradually switches between 

the following maintenance functions:

TMR 1 

- individual trip counter. The value is reset by holding down the Mode button for 

6 seconds. 

OIL CHG 

- oil change. The function has two oil change intervals. The first is after 5 hours 

(oil change after the engine has run itself in) and is shown only once. The second is after 

25 hours (standard oil change).

AIRFILTER SVC 

- cleaning or changing the oil filter. The interval is set to 50 hours.

Two hours before the set interval has elapsed the display will show a message lasting 

10 seconds. After the interval has elapsed the display will show a message NOW. Any of the 

above mentioned alarms can be reset by holding down the Mode button for 6 seconds.

*  In the event that after starting the engine and running the machine at maximum rpm without the mowing deck engaged and 

the lights turned on, and after approximately 1 minute of operation the colour of the indicator light does not change from red to 

green, possibly blue, then this indicates a malfunction of the recharging circuit and it is necessary to seek out a professional 

service centre.

**  Tampering with the counter will result in the warranty becoming void – the motor hours counter is equipped with a protective 

seal. In the event of a malfunction of the motor hours counter, immediately inform your service centre.

Содержание UJ102

































































Отзывы: