Masport UJ102 Скачать руководство пользователя страница 42

42

91

8)  Slowly move the throttle lever to position “

MIN

” 

Allow the engine to run several minutes before turning on the mowing deck.

Never 

leave a started engine running in a closed or poorly ventilated area. Exhaust fumes contain gases that are harmful to your 

health.

Keep your hands, legs and clothing 

away from

 moving parts and the exhaust.

5.2.1 EMERGENCY TRAVEL SYSTEM

The machine is equipped with a special emergency travel system that makes it possible to start the engine in an emergency and 

drive the machine back in the event of some kind of malfunction of the machine's electrical system that prevents the machine from 

being started after meeting all the starting conditions, see above.

Procedure for activating the emergency travel system:

  sit on the seat

  push down the brake pedal

  set the key in the switch box to position "ignition on" (electrical circuits connected) 

  Press the R button 5 times 

Subsequently, it is possible to start the machine and to drive to a location for transport to a service centre. It is not possible to 

engage the mowing deck when in the emergency travel mode!

5.3 | TURNING OFF THE ENGINE

a)  Move the throttle lever to position “

MIN

”.

b)  If the mowing deck is activated, deactivate it by pushing down the switch.
c)  Turn off the engine by moving the key to position “

STOP

” and take the key out of the ignition.

If the engine is overheated, allow it to run for a while at minimum speed.

Never stop the engine by merely getting off the seat, while leaving the key in the ignition in the position “ON” as this may 

result in an electrical defect.

Always turn the key to the “OFF” position and remove it from the ignition.

 This will prevent an undesirable start up of the 

machine by an unauthorised person or children.

Before turning off the ignition, lower the engine speed to slow 

for the event of self-ignition. Not following this instruction may 

result in damage to the engine and exhaust.

Never disconnect the battery cables while the engine is running! 

This could damage the engine regulator.

5.3.1 LEAVING THE MACHINE WHILE THE ENGINE IS RUNNING

If you want or need to leave the machine for a while (e.g. in order to remove obstacles, etc.) and you intend to then continue 

mowing, it is possible to 

get off and leave the engine running

. This saves the machine’s battery.

Conditions for getting off the machine with the engine running:

  the mowing deck is disengaged

  the throttle control lever is in position “

MIN

  the gear is in neutral and the hand brake is activated (the brake indicator light is on)

5.4 | ENGAGING AND DISENGAGING THE MOWING DECK

5.4.1 ENGAGING THE MOWING DECK

  Move the throttle lever to position “

MAX

”.

  Using the mowing deck elevation adjustment lever set the position of the mowing deck and thereby the mowing height.

  Set the mowing deck activation switch to position “

ACTIVATED

”.

Conditions for activating the mowing deck:

-  the driver is sitting in the seat of the machine
-  the grass catcher, or the deflector or the exhaust chute cover is installed 
-  the AUT/MAN switch (optional accessory) is in position “AUT” and the grass catcher is empty
-  the AUT/MAN switch (optional accessory) is in position “MAN”.

Содержание UJ102

































































Отзывы: