Mash Adventure 400cc, Руководство пользователя

Страница: 14 / 42

ADVENTURE 400cc
-13-
I
，
Single mileage display mode, single mileage reset
。
II
，
The average speed of display mode, the average value of zero velocity
。
Warning:
When driving motorcycles don't adjust the instrument, otherwise it will lead to out of control, resulting in personal
injury or cause of the accident.
The Malfunction Indicator Lamp and Diagnostic Trouble Code(DTC)
1.If there are no DTC on ECU, The Malfunction Indicator Lamp will be following
show when you start motor
2.If there are code 32 or 4 showing on the malfunction Indicator will be following
show when you start motor
Code will be flashed for four times, then DTC turn off.
Instruction table of FAI indicator’s information and trouble solutions
Code Description Diagnosis Name Trouble shooting level
1 Engine over temperature diagnosis TCO_OVER_TEMP 2
2 Crank wrong tooth number diagnosis
TOOTH_NR
1
3 Throttle position adaptation diagnosis
V_TPS_AD_BOL_1
1
4 Throttle position sensor 1 diagnosis TPS_1 1
5 Throttle plausibility diagnosis TPS_1_INTM 1
6 Battery voltage diagnosis VBK 1
7 Intake air temperature sensor diagnosis TIA 2
9 Idle Speed controller adaptation diagnosis ISC_ISA_AD_MV 1
10 Injector valve diagnosis VI 1
11 Ignition coil diagnosis IGA 1
12 Electrical fuel pump diagnosis EFP 1
13 Engine overspend diagnosis N_64_MAX 2
16 Engine temperature diagnosis TCO 1
18 MIL diagnosis MIL 1
19 O2 sensor signal circuit diagnosis VLS_UP_1 1
20 O2 Sensor Heater diagnosis LSH_UP_1 1
21 MAP sensor diagnosis MAP 1
23 Lambda control diagnosis TI_LAM_COR 2
26 Second air valve diagnosis SAV 2