Mash Adventure 400cc, Руководство пользователя, Страница: 19 / 42

ADVENTURE 400cc
-18-
6
、
Gear Shift
Gear shift system is 5 international gear as the picture :
•Close the throttle grip , hold on the clutch grip and change
the gear .
•Use the foot touch to the gearshift pedal gently until hear
‘KATA’ , if touch the gearshift pedal hardly , the gearshift
system will be broken .
＜
Gear down operation
＞
If you want to speed up drastically, for example, when
passing another motorcycle, gearing down can provide
faster acceleration, but if the speed gets too high, damage
for the engine may be caused by over-speed.
7
、
The use of clutch
In the shift, hand pull the clutch handle
，
Then slowly
loosen. Driving the clutch handle must be released in full
。
Should be smooth and consistent clutch noise at idle speed,
when gas or oil return, clutch a slight "GEGE" sound is a
normal phenomenon, when the speed is stable when the
sound disappears. Not to the clutch in the half clutch state
for a long time, it will cause the clutch wear sharp.
8
、
Brake
Don't put your foot on the brake pedal while driving or
braking handle, must be fully released, otherwise it will
cause the brake temperature rise to unusually high. Brake
shoe, brake disc excessive wear, and increases the braking
distance.
9
、
Air filter installation
Air filter installed in proper position. requirements for air
filter installation position as far as possible in the highest
position, at the same time, we must avoid in the dust
"vortex" centralized place. otherwise, the air filter inlet will
be adsorbed more dust, causing the engine abnormal wear.
Air filter cleaning and maintenance. the inlet of the joints
of any leakage is not allowed, if in the region with more
sand, every 1000 km cleaned once air filter. air filter
efficiency
≥
98%.
10
、
Rearview mirror
Before driving, must adjust the rearview mirror angle.
11
、
Oil cooler installation
1
、
Oil pot total volume 2.0L, intermediate position oil
dipstick oil pot on the line for 1.7L
。
2
、
Pot plus external pipe and radiator total volume
loading was 2.3 ± 0.05L
。
Filling volume for 2.2L
。
Oil
radiator shall be installed in the face of location of the
wind
。
3
、
Oil pot and oil cooler mounted, shall not affect the
cooling engine cylinder head, cylinder, cylinder head of
orthographic projection position in front of the front
direction should be take
。
5
4
3
2
N
1
Shifting forward
Shifting backward