SPARTAN IRONWORKER
MAINTENANCE
© MARVEL MFG. CO., INC. MANUAL
PL/OMiW-2CYL_V2
(08/07)
J-3
Avoid serious injury.
Turn off the machine's power
and lock it out before servicing
the machine.
2.
Turn off the machine’s main electrical
disconnect switch and lock it in the "Off"
position.
3.
Remove the hydraulic compartment's
access cover.
The hydraulic fluid filler cap (B) is located on top
of the hydraulic tank.
4.
Remove the filler cap (B, above) and add
Mobil® DTE-25 anti-wear hydraulic oil,
or equivalent, until the hydraulic fluid is
near the top of the sight gauge (A).
Avoid serious injury.
Hydraulic
fluid
creates
a
serious slipping hazard. Clean
up all spilled hydraulic fluid
from the floor.
5.
Reinstall the filler cap and the hydraulic
compartment access cover.
CHANGING THE
HYDRAULIC FLUID
The hydraulic fluid must be changed at least once
every year and any time it becomes dirty or
contaminated.
Avoid serious injury.
Turn off the machine's power
and lock it out before servicing
the machine.
1.
Turn off the machine's
main electrical disconnect switch and lock
it in the "Off" position.
The hydraulic fluid drain plug (A), filler port (B),
sight gauge (C), and tank access cover (D).
2.
Remove the hydraulic compartment's
access cover.
3.
Remove the hydraulic fluid drain plug (A)
and drain the hydraulic fluid into a
suitable container.
4.
Replace the drain plug.
5.
Remove the tank access cover (D) and
wipe the inside of the hydraulic tank with
a clean, lint-free rag.
6.
Re-install the tank access cover with a
new gasket.
7.
Remove the filler cap (B) and add Mobil®
DTE-25 anti-wear hydraulic oil, or
equivalent, until the hydraulic fluid sight
gauge (C) shows the fluid level is at 3/4
full.
WARNING
WARNING
WARNING
A
B
D
B
A
C
