ANGLE SHEARING STATION
SPARTAN IRONWORKER
F-5
© MARVEL MFG. CO., INC. MANUAL
PL/OMiW-2CYL_V2
(08/07)
ANGLE SHEAR CORNER RADIUS
MODEL
A
B
66D/DX
1 / 4”
1 / 2”
88D/DX
1 / 4”
1 / 2”
110D/DX/2
1 / 4”
1 / 2”
IW135D/DX
1 / 4”
1 / 2”
IW180DX
1 / 4”
1 / 2”
Repositioning the Moveable Blade:
For the highest quality cuts, the blade's corner
radius that most closely matches the inside radius
of the material to be sheared should be in the
cutting position.
Avoid serious injury.
Turn off the machine's power
and
lock
it
out
before
replacing the lower blades.
1.
Turn off the main electrical disconnect
switch and lock it in the "Off" position.
Avoid injury. The guard weighs
22 lbs. Use care when removing
it from the machine.
2.
Remove the socket head cap screws that
hold the guard in place and carefully
remove the guard.
Socket head cap screws (E) hold the guard in
place.
3.
Open the guard on the discharge side of
the angle shear and remove the three
socket head cap screws (F) that hold the
moveable blade to the slide.
The moveable blade is held in place by three
socket head cap screws (F).
4.
Rotate the blade until the desired corner
radius is in the cutting position (G) and
secure it in place with the three socket
head cap screws (F).
WARNING
CAUTION
E
F
F
G