MARUTI SUZUKI Automobile, Руководство пользователя

Страница: 71 / 177

70
System Operating Instructions
Natural ventilation
Select “VENTILATION” and “FRESH AIR”,
the temperature selector to the desired
temperature position, and the blower
speed selector to “OFF”. Fresh air will flow
through the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
than “OFF”.
Normal heating (using outside air)
Select “HEAT” and “FRESH AIR”, the
temperature selector to the desired
temperature position and the blower speed
selector to the desired blower speed
position. Setting the blower speed selector
to a higher blower speed position
increases heating efficiency.
Quick heating (using recirculated air)
The control settings are the same as for
nor mal heating except you select
“RECIRCULATED AIR”. If you use this
heating method for an extended period of
time, the air in the vehicle can become
contaminated and the windows can become
misty. Therefore, use this method only for
quick heating and change to the normal
heating method as soon as possible.
Cool face/Warm feet
Select “BI-LEVEL” and “FRESH AIR”, the
temperature selector to the desired
temperature position, and the blower
speed selector to the desired blower
speed position. Unless the temperature
selector is in the fully COLD position or
fully HOT position, the air that comes out
of the centre and side outlets will be cooler
than the air that comes out of the floor
outlets.
Normal cooling
Turn on the “A/C” switch, set the air flow
selector to “VENTILATION”, the
temperature selector to the desired
temperature position and the blower speed
selector to the desired blower speed
position. Setting the blower speed selector
to a higher blower speed position
increases cooling efficiency.
You can switch the air intake selector to
either “FRESH AIR” or “RECIRCULATED
AIR” as you desire. Choosing “RECIRCU-
LATED AIR” increases cooling efficiency.
Quick cooling (using recirculated air)
The control settings are the same as for
nor mal cooling except you select
“RECIRCULATED AIR” and the highest
blower speed.
NOTE:
• If you select “RECIRCULATED AIR” for
an extended period of time, the air in
the vehicle can become contaminated.
Therefore, you should occasionally
select “FRESH AIR”.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner
with the air intake selector at “FRESH
AIR” and the blower at high speed.
Dehumidifying
Turn on the “A/C” switch, set the air flow
selector to the desired air flow selector
position, and select “FRESH AIR”, the
temperature selector to the desired
temperature position, and the blower
speed selector to the desired blower
speed position.
NOTE:
Because the air conditioner dehumidifies
the air, turning it on will help keep the
windows clear, even when blowing heated
air using the “DEMIST” or “HEAT &
DEMIST” functions.
INSTRUMENT PANEL
3-19