MARUTI SUZUKI Automobile Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 177

background image

110

Vehicle Loading

Your vehicle was designed for specific
weight capacities. The weight capacities
of your vehicle are indicated by the Gross
Vehicle Weight Rating (GVWR) and the
Gross Axle Weight Rating (GAWR, front
and rear). The GVWR and GAWR (front
and rear) are listed in the
“SPECIFICATIONS” section.

GVWR – Maximum permissible overall
weight of the fully loaded vehicle (including
all the occupants, accessories and cargo
plus the trailer nose weight if towing a
trailer).
GAWR – (Front and Rear) Maximum
permissible weight on an individual axle.

Actual weight of the loaded vehicle and
actual loads at the front and rear axles
can only be determined by weighing the
vehicle. Compare these weights to the
GVWR and GAWR (front and rear). If the
gross vehicle weight or the load on either
axle exceeds these ratings, you must
remove enough weight to bring the load
down to the rated capacity.

Never overload your vehicle. The
gross vehicle weight (sum of the
weights of the vehicle , all the
occupants, accessories, cargo plus
trailer nose weight if towing a trailer)
must never exceed the Gross Vehicle
Weight Rating (GVWR). In addition,
never distribute a load so that the
weight on either the front or rear axle
exceeds the Gross Axle Weight
Rating (GAWR).

Always distribute cargo evenly. To
avoid personal injury or damage to
your vehicle, always secure cargo to
prevent it from shifting if the vehicle
moves suddenly. Place heavier
objects on the floor and as far
forward in the cargo area as
possible. Never pile cargo higher
than the top of the seat backs.

Trailer Towing

Your MARUTI SUZUKI was originally
designed to carry people and a normal
amount of cargo, not to tow a trailer.
MARUTI SUZUKI does not recommend
you use your vehicle to tow a trailer if
there is not any local regulation about
towing capacity permitted (for example,
registered or statutory towing capacity).
Towing a trailer can adversely affect
handling, durability, and fuel economy.

VEHICLE LOADING AND TOWING

7-1

«
...
109
110
111
112
113
...
»

Содержание Automobile


















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Automobile

Бренд: GMC Страницы: 140

STRONGARM RVR303

Бренд: Blue Giant Страницы: 48

Бренд: Cadillac Страницы: 368

Бренд: Luverne Страницы: 3

Бренд: Navman Страницы: 27

Бренд: Whispbar Страницы: 15

Бренд: Reese Explore Страницы: 9

Бренд: Volvo Страницы: 42

Бренд: Saturn Страницы: 440

Бренд: Discount Car Stereo Страницы: 8

Бренд: ULTIMATE SPEED Страницы: 56

Бренд: Axxess Страницы: 16

Бренд: Lexus Страницы: 82

Бренд: Blue Ox Страницы: 5

Бренд: Mazda Страницы: 604

Бренд: Yakima Страницы: 10

Бренд: Yakima Страницы: 10

Бренд: Yakima Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды