MARUTI SUZUKI Automobile, Руководство пользователя

Страница: 137 / 177

136
60G160S
CAUTION
• When installing the spark plugs,
screw them in with your fingers to
avoid stripping the threads. Tighten
with a torque wrench to 25 Nm (2.5
kg-m, 18.0 lb-ft). Do not allow
contaminants to enter the engine
through the spark plug holes when
the plugs are removed.
• Never use spark plugs with the
wrong thread size.
54G106
Spark plug gap “a”
0.8 – 0.9 mm (0.031 – 0.035 in.)
CAUTION
When replacing spark plugs, you
should use the brand and type
specified for your vehicle. For the
specified spark plugs, refer to the
“SPECIFICATIONS” section at the
end of this book. If you wish to use
a brand of spark plug other than the
specified plugs, consult your
MARUTI SUZUKI dealer.
65D204
NOTE:
If your engine is equipped with the high
tension cord type ignition wiring and you
experience some firing problem of spark
plugs, such as, hard engine-starting,
misfire etc., the cause may be located not
only on spark plugs but also on
deteriorated ignition wirings (generally,
used for more than 80,000 km or five
years). If spark plug replacement does not
solve the problem, have the ignition wiring
and other ignition system inspected by
your MARUTI SUZUKI dealer.
INSPECTION AND MAINTENANCE
8-17