MARUTI SUZUKI Automobile, Руководство пользователя

Страница: 160 / 177

159
63J101
5) Position the jack vertically and raise
the jack by turning the jack handle
clockwise until the jack head recess
fits the jacking point.
6) Continue to raise the jack slowly and
smoothly until the tyre clears the
ground. Do not raise the vehicle more
than necessary.
CAUTION
Never jack up the vehicle with
passengers inside the vehicle.
• Use the jack only to change wheels
on level, hard ground.
• Never jack up the vehicle on an
inclined surface.
• Never raise the vehicle with the
jack in a location other than the
specified jacking point (shown in
the illustration) near the wheel to
be changed.
Especially, do not raise the vehicle
with a jack at a part of the torsion
beam which is located under the
vehicle body, between rear wheels.
• Make sure that the jack is raised
at least 51 mm (2 inches) before it
contacts the suspension arm boss.
Use of the jack when it is within
51 mm (2 inches) of being fully
collapsed may result in failure of
the jack.
• Never get under the vehicle when
it is supported by the jack.
• Never run the engine when the
vehicle is supported by the jack
and never allow passengers to
remain in the vehicle.
EMERGENCY SERVICE
9-2
54G253
63J100