MARUTI SUZUKI Automobile Скачать руководство пользователя страница 143

Страница: 143 / 177

142

Changing Wheels
Type 1 & Type 2

77J024

Dzire

55KS031

77J036

To change a wheel, use the following
procedure:
1) Clear all passengers and luggage from

the vehicle.

2) Remove the jack, tools and spare wheel

from the vehicle.

3) Loosen, but do not remove the wheel nuts.
4) Jack up the vehicle (follow the jacking

instructions in the “EMERGENCY
SERVICE” section in this manual).

5) Remove the wheel nuts and wheel.
6) Before installing the new wheel, clean

any mud or dirt off from the surface of
the wheel and hub with a clean cloth.
Clean the hub carefully; it may be hot
from driving.

7) Install the new wheel and replace the

wheel nuts with their cone shaped end
facing the wheel. Tighten each nut
snugly by hand until the wheel is
securely seated on the hub.

8) Lower the jack and fully tighten the

nuts in a crisscross fashion with a
wrench as shown in the illustration.

54G116

Tightening torque for wheel nut
85 Nm (8.5 kgf-m, 61.5 lb-ft) (Petrol)
70 Nm (7.0 kgf-m, 50.6 lb-ft) (Diesel)

INSPECTION AND MAINTENANCE

8-23

Содержание Automobile


















































































































































































Результаты поиска

Содержание Automobile

Отзывы:

Похожие инструкции для Automobile

Бренды по названию

Популярные бренды

MARUTI SUZUKI Automobile, Руководство пользователя

Результаты поиска

Содержание Automobile

Отзывы:

Похожие инструкции для Automobile

Бренды по названию

Популярные бренды