background image

46

Lighting/Turn Signal Control
Lever

Lighting Operation

75J004

To turn the lights on or off, twist the knob
on the end of the lever. There are three
positions: in the “OFF” position all lights
are off; in the middle position the front
parking lights, taillights, licence plate light,
and instrument lights are on, but the
headlights are off; in the third position the
headlights come on in addition to the other
lights.

75J005

With the headlights on, push the lever
forward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on
the instrument panel will come on. To
momentarily activate the high beams
(main beams) as a passing signal, pull
the lever slightly toward you and release
it when you have completed the signal.

Lights “On” reminder (if equipped)

A buzzer/chime sounds to remind you to
turn off the lights if they are left on when
the ignition key is removed and the driver’s
door is opened.

Rear Fog Light Switch

75J006

To turn the rear fog light on, twist the knob
as shown in the illustration with the head
light switch in the third position. When the
rear fog light is on, an indicator light on
the instrument cluster will come on. Do
not turn the rear fog light switch unless
the head light switch is in the third position.

NOTE:
When the head light switch is returned to
the “OFF” position, the rear fog light switch
will be cancelled automatically.

STEERING COLUMN CONTROLS

2-3

Содержание Automobile


















































































































































































Отзывы: