Marus TL 500, Руководство пользователя

Страница: 17 / 36

15
Replacing the Bulb
For maximum reliability and
optimum performance, use
replacement bulb no. 70-30441.
The bulb is a two-prong push-in type.
To replace a bulb:
1. Open the shield by pressing the re -
lease button and swinging the shield
open.
2. After waiting for it to cool, grasp the
old bulb by the base and pull straight
outward. A gentle rocking motion will
help work the bulb loose.
3. Grasp the new bulb by the base, align
the pins with the matching holes, and
press the bulb firmly into place.
4. Wipe the glass portion of the bulb
clean with denatured alcohol.
5. Close the shield by depressing the
shield release button while swinging it
shut until the latch is engaged.
6. Check the light’s focus and adjust as
required.
Shield
Bulb
Warning! Do not attempt
to remove a bulb until it
has been allowed to cool
for at least two minutes.
Caution!
Do not to touch the glass
portion of the bulb. Oils from the
skin can cause the bulb to fail. If
you touch a bulb or reflector, wipe
it clean with denatured alcohol
before turning on the light
.