Martin Audio MLA MINI, Руководство для продвинутых пользователей

Страница: 58 / 256

MLA Mini Advanced User Guide V1.0
58
MLA MINI
ADVANCED USER GUIDE
Step 4b (with Fixed Tilt Bracket): Lift the first MLA Mini cabinet onto the bracket. The lugs on
the ends of the main cross-arm should mate with the slots in the front corners of the cabinet.
Secure these points with Flying Pins. Attach the Tilt Bracket Swing Arm to the rear of the tilt
bracket in the Ground Stack hole (marked with a
) and secure with the Flying Pin supplied.
Ensure the swing arm is pointed upwards as shown.
Step 5: Lift the next cabinet on top of the previous one and secure both the front corners with
further Flying Pins. At the rear, rotate the upper cabinet’s mounting plate so that it engages with
the slot in the lower cabinet’s bracket, and set the angle between the first and second cabinets
by fitting a Flying Pin in the appropriate hole on the lower bracket; this will be the one that sets
the angle calculated by Display 2.2. (If using Preset 1 or 2, use the “6.5” hole; if using Preset
3, use the “10” hole.)