manualshive.com logo in svg

Martin Audio MLA MINI, Руководство для продвинутых пользователей

Поделиться
Скачать
Martin Audio MLA MINI Скачать руководство пользователя страница 20

MLA Mini Advanced 

User Guide V1.0

20

MLA MINI    

ADVANCED USER GUIDE

Ground Stack Bars (Martin Audio Part Nos. ASF20056/7)

  

These precision alignment bars are used in conjunction with the Flying Frame to define the angle 
between the Mini array and an MSX sub when the system is configured for ground stacking. 
They will also be needed when the Mini array is to be ground stacked alone. Two versions are 
available, long (Martin Audio Part No. ASF20056) and short (ASF20057); the two sizes allow 
different ranges of angles to be set.

Flying Pins

The pins are used to lock the individual Mini cabinets into position at the defined inter-cabinet 
angle, and also to lock a Mini array to the Transition Frame or Flying Frame at the required angle. 
The pins are supplied with the relevant components.

Содержание MLA MINI

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды