Martin Audio MLA MINI, Руководство для продвинутых пользователей

Страница: 180 / 256

MLA Mini Vu-Net V1.0
180
MLA MINI
VU-NET
Send Feedback: opens a communication window which gives you an opportunity to communicate
any issues or ideas for new features straight back to Martin Audio:
Note that an internet connection is required for your Feedback to reach Martin Audio.
TOOL BAR
The toolbar has a number of icons which offer either quicker access to commonly used functions
from the file menus or specific functions which are essential to system set up and operation.
The first 4 icons are file management tools:
These are New Project, Open existing project, Save and Save As.
The next group are graphic alignment tools for making your system diagrams look neat:
The first, second, fourth and fifth of these are only active when two or more components are
selected; the third is only active when one or more Merlin controllers are selected.
The first icon aligns all selected components horizontally on the page. The second aligns all
selected objects vertically. The third tool is used with the Merlin. When a system is discovered
its network connections are drawn in place. The two U-Net nodes on the Merlin, usually run
as a closed loop will go off to the first cabinet in the array and back from the last cabinet.
Depending on the layout of your system diagram this may mean that network cables are crossing
over looking a little messy. This tool reverses the two network nodes in the diagram to try and
neaten the diagram. Note that it is only adjusting the graphic representation; it is not making
any electrical changes to the U-Net nodes in the Merlin.
The final pair of icons will reverse the position of any selected objects. Perhaps you have an MLA
array to the right of an MLX array and you would rather position them round the other way, you
just select both arrays and click on the ‘Reverse order horizontally’ button and their order will
be reversed maintaining their connections and keeping them aligned. Likewise if you wish to
reverse the vertical order, position DSX subs under an MLA Compact array when the diagram has
the subs on top, select the required components and click the ‘Reverse order vertically button’