Marshall Electronics VS-102 HDSDI/HDI, Руководство пользователя

Страница: 59 / 64

5- Decoder Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 59 of 64 5/7/12

Sensor1 / Sensor2
Configure the actions when the sensor 1 or 2 is activated. Multiple actions can be set
for a single event.

On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a
single event.

On Motion
Configure the actions when motion is detected. Multiple actions can be set for a single
event.

On Disconnect
Configure the actions when the link (connection) with peer system is disconnected.
Multiple actions can be set for a single event.

Alarm and Beep Activation Duration
Set the duration of alarm or beep activation in case of an event. If it is set to continuous,
it will be in active state until an operator reset it manually.