5- Decoder Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 57 of 64
5/7/12
Remote Type
-
Normal: Connection for Marshall Encoder and Decoder.
- RTSP/RTP: Decoder system can make connection though RTSP protocol and get
the stream via RTP. It is also possible to make connection with other vendor’s
H.264 IP camera supporting standard RTSP/RTP and standard H.264 algorithm.
- To make RTSP Connection, set
Remote Type
to “RTSP”, enter the RTSP URL of
remote system to
Remote Address,
and RTSP access port number to
Remote Port
.
Currently supports video only.
Media Protocol
Select protocol used for transmission of audio and video data between remote system
and decoder. The decoder system or VMS can choose media protocol among TCP,
UDP and Multicast.
Remote Address
Address of the remote system to connect.
Port
Port of the remote system to connect.
Remote Channel
The channel can be selectable when the remote system has more than multiple video
channels.
Use Streaming Server
- Decoder system has the settings to connect to Encoder or IP Camera via the
Streaming Server. To connect to Encoder or IP Camera via Streaming Server,
Use
Streaming Server
of
Remote
group in
Network
page should be set to
ON
and
information of the
Streaming Server (SS)
needs to be configured appropriately.
-
SS IP Address:
IP address of Streaming Server.
-
SS Port:
Enter Port number that is set when registering Streaming Server.
-
SS ID:
Enter Streaming Server ID.
-
SS Password:
Enter Streaming Server Password.
