4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 35 of 64
5/7/12
Bit Rate Control
When one or more clients are connected to the camera, some of the clients do not have
enough bandwidth to receive the encoded stream completely. In this case, it is possible
to select the stream video mode:
-
Frame Drop Mode:
Encoding is performed strictly according to video settings.
When a client is connected through a network with less bandwidth, it may not
receive all the frames. Frames are dropped on sending module if the network is
bottlenecked.
-
Suppression Mode:
Encoding bit rate and frame rate are adjusted so frames are
not lost when client network bandwidths are limited. In this case, all clients can be
affected by the averaged bit rate and frame rate.
Address Information
The following network information is displayed (read only):
IP Filtering Setup
Current IP Address:
The Camera’s IP Address is useful when the camera is set to
DHCP Mode.
Current Domain Name:
The Registered Domain Name is displayed when the
camera is registered on the DDNS Server.
MAC Address:
The MAC Address is used for the Camera’s DDNS Registration and
is displayed on the DDNS Server.
Connecting:
Client IP Addresses that are currently connected to system are listed.
