2- Installation
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 12 of 64
5/7/12
2.6 Check If It Works
Once the power is supplied to the camera, it will start booting. The system will boot up
to operating mode after approximately 40-60 seconds. The green LED on the Ethernet
Port will flash indicating the system is ready.
Software provided on the disc called
VS Manager
allows you to check the IP address
and other network details of the camera. Please refer to the VS Manager manual for
instructions on how to find the IP address of the camera and to make necessary
changes.
Encoder LED Display
The LED’s above show that the
Camera is connected but a Decoder is not.
Once an
Encoder is connected to a Decoder, the color of the “LINK” LED Display will turn green
and the “DATA” LED will blink as video or audio transmissions occur.
Decoder LED Display
These LED’s above show that the
Decoder has started without connecting to an
Encoder
. Once an Encoder is connected, the color of “LINK” LED Display will turn
green and the “DATA” LED will blink as video or audio data transmissions occur.
PWR STATUS LINK
DATA
OFF
Red
Green
Blinking
OFF
PWR STATUS LINK
Red
Green
Blinking
DATA
OFF
