4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 18 of 64
5/7/12
Remote Setting is available by using Web Browser. Enter IP Address of the Camera
and a live view screen appears (see below). Press the
Setup
button located in the
upper right area of the monitoring screen for Server Setup. For Remote Setting, the
user should have manager level authority or higher.
The remote configuration window may be slightly different depends on the System
Modes (Encoder, Decoder). The general explanation of the configuration in this manual
is based on the Encoder System and differences according to the modes will be
clarified when needed.
The configurations are grouped into 10 categories:
System
,
Video
,
Audio
,
Network
,
Serial
,
Event, PTZ, Record, User and Camera.
Any configuration changes are not
applied until “
Apply”
Button is pressed. Leaving the page without pressing “
Apply”
will
discard any changes made.
