4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 49 of 64
5/7/12
Schedule Table
Actual Recording Mode is determined by
Schedule Table
where recording mode is
configured by day (of a week) and hour.
Operation of each Recording Mode as follows:
-
Record OFF
: No recording.
-
Continuous
: Records continuously.
-
Disconnect
: Recording is started when the system loses the connection to its last
client (Decoder, VMS/NVR) etc. When there are multiple clients and one of the
client is disconnected, this doesn’t happen.
-
Event Type
: Records when an event configured in
Event Type
setting happens.
Checking Status of Recording
Recording status can be checked on the main view page.
Search and Playback
Recorded video and audio data can be saved as AVI format in the disk. In general, one
AVI file is created for an event in case of event-based recording. However, it is possible
that recorded data by serious of events happening continuously can be merged to a
single AVI file depending on pre/post event time setting. The size of file is limited to 10
~ 200MB or 10 minutes. In case of continuous recording, AVI files are created in series
and the size of each is limited to 10 ~ 200MB or 10 minutes.
Search
Actual recording of a file currently being recorded doesn’t appear until it is completed. In
case of Continuous recording, a file will be shown after 10 minutes from the start of
recording, for a file is generated every 10 minutes.
1. Press
Search Page
button on the
Record
setup page. Dates with recording data
will be shown as follows:
2. First, choose the date for search and the list of AVI files will be shown.
3. The file name shows the date and time: “
Date Begin Time End Time.avi
”
.
