4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3
Page 32 of 64
5/7/12
Authentication
RTSP Authentication
If
RTSP Authentication
is
ON
, user in the client side is asked to enter User ID and
Password.
HTTP API Authentication
When
HTTP API authentication
is
ON
, HTTP Authentication is asked for all clients that
use HTTP API.
One-Way Streaming
This Server provides two kinds of one-way streaming based on UDP to clients:
RTP
and
MPEG-TS
. Both types of transmission do not provide back change commands
from this client (decoder).
RTP (Real-Time Transport Protocol
) is an Internet Protocol used for transmitting
single real-time multimedia data such as audio and video to a select group of connected
clients. Normally,
RTSP
uses
RTP
to format packets of multimedia content. RTP menu
is used when the RTP is streaming without the RTSP Connection. RTP stream will be
transmitted to the destination set. The
SDP
(Session Description Protocol) file can be
found in the server and the client can retrieve it by using http connection. See settings
below:
-
Destination IP
: Set the IP Address of the destination system receiving the RTP
stream. If the system is a decoder, RTSP authentication information must be
entered in the RTSP URL:
rtsp://
admin:1234
@192.168.10.100:554/video1
-
Destination Port
: Set the Destination Port to receive RTP Stream.
-
User Name
: Enter the User Name that will be used in the SDP File.
-
File Name
: Enter the File Name that will be used for the SDP File Name.
This can be accessed through
http://ServerAddress/filename
