Marol CL-10SET, Руководство по установке

Страница: 15 / 24

14
6
Periodical Inspection and Maintenance
• For prevention against damage or troubles of System, routine inspection and periodical maintenance
are necessary. When abnormal condition is found on inspection, immediately repair it or keep it in
good condition.
Item Period Contents
Inspection of oil
quantity Daily for 10 days after
installation and every
10 days thereafter. During dead ship, after turning wheel slowly 1~2 rotation
from side to side at neutral position, open oil filling cap and
inspect hydraulic oil. If reduced, refill with oil immediately.
(Recommended hydraulic oil: ISO VG15 equivalent)
Inspection of oil
leakage Daily for 10 days after
installation and every
10 days thereafter. Inspect oil leakage from pipe fitting section, Helm Pump,
shaft of Receiving Cylinder or so.
If leakage is found, repair the spot immediately.
Additional
tightening Daily for 10 days after
installation and every
10 days thereafter. Tighten additionally fitting bolts and nuts of Helm Pump,
Receiving Cylinder and pipe fitting section.
Supplementation
of grease Every 1 month Supplement of grease to ball joints and connecting pins of
metal fitting between Receiving Cylinder and tiller.