Marol CL-10SET, Руководство по установке

Страница: 8 / 24

7
• Installation of Cylinder MRB Type (Rotary type)
Keep same height
Max. size
A
90°
90°
1. Drill 4 holes according to the table and install
Cylinder tightly by bolts and nuts to the place
to be installed.
2. Install it by paying attention to dimensions,
positions and angles of the figure.
Caution
Make the same height the connection
link between Receiving Cylinder and
tiller lever, and install it on even level. If
connection link is listed, the connection
link may come off during steering.
• Installation of Cylinder MS Type (Direct-driving type)
1. Drill 4 holes according to the table and install
Cylinder tightly by bolts and nuts to the place
to be installed.
Receiving Cylinder type Diameter of fitting holes
MRB-63A 13mm
MRB-75A 18mm
MRB-80A 18mm
Receiving Cylinder type Max. size A
MRB-63A 400mm
MRB-75A 500mm
MRB-80A 500mm
Receiving Cylinder type Diameter of fitting holes
MSB-35 13mm
MS-42 13mm
MS-42L 13mm
MS-55L 18mm