MARLOW-HUNTER MH31, Руководство оператора

Страница: 209 / 267

Sails and Rigging
12.9
stopper will also have to be partially disassembled to
allow proper positioning of this continuous line.
SHACKLE MAINSAIL HEAD TO
HALYARD SWIVEL
INSERT MAINSAIL LUFF INTO
SAIL FEEDER
ATTACH MAINSAIL TACK TO
TACK HOOK
Figure 12.6
Figure 12.7
12.7.11 Jib Furler And Sail Installation
The jib furler (Fig. 12.8) will be assembled by your dealer
during the commissioning process. Depending on you
purpose, removing or reinstalling the jib furler simply
involves detaching it from the upper mast and stem plate
(see Stepping the Mast above for details on stepping the
mast with the jib furler attached).
Please refer to the jib furler manufacturer’s OEM manual
for details on assembling, disassembling, adjusting and
maintaining the furling system as well as jib installation.
Once the furler and jib are assembled, raised and furled,
verify or route the jib sheets as described in the Running
Rigging section above (see Fig. 12.24 for overall layout).
Finally, verify or route the jib furling line as described in
the Running Rigging section above.
Figure 12.8
12.7.12 Spinnaker Installation
Refer to Fig. 12.25 for the spinnaker layout.
Attach the single block to the forward facing eye of 1.