MARLOW-HUNTER MH31, Руководство оператора

Страница: 131 / 267

DC Electric Systems
7.11
panel are provided by the DC system and controlled with
the toggle switch labeled “PANEL LTS”. This circuitry
is protected by a 5 amp fuse located on the back of the
panel.
7.3.2.7 Bilge Pump Switch
Half way down the right side of the panel, immediately
below the Panel Lights switch, is the momentary toggle
switch for the main bilge pump. This switch allows manu-
al control of the bilge pump and is energized regardless if
the DC Panel is energized or not. Toggling to the right is
the momentary ON position and engages the bilge pump
while illuminating the LED on the toggle tip, indicating an
energized state. Releasing the toggle switch returns to
the OFF position and disengages the bilge pump.
The circuit breaker for the main bilge pump is located on
the Battery Switch Panel.
For additional details on the bilge pump system, please
refer to the Waste Systems chapter of this manual.
NOTE: Consult the pump manufacturers’ OEM man-
ual for instrument operation, care and maintenance.
7.3.2.8 LPG Gas Breaker
The breaker for the LPG remote panel protects the panel
from a power fault. The 5 amp pop-out breaker is labeled
“LPG GAS”. The LPG panel is an ON/OFFswitch allow-
ing for remote control of LPG flow to the stove.
Please see the Fuel chapter in this manual for informa-
tion on LPG hazards and use of the LPG system.
7.3.2.9 Refrigerator Breaker
This 15 amp switch breaker provides power to the optional
refrigerator/freezer units. It is labeled “REFRIGERATOR”
on the panel and protects them from a power fault.
7.3.2.9.1 Basic Refrigerator Operation
Choose the source battery(ies) by positioning the
Battery Switch to “1” (Start Battery) or “2” (House
Battery) to provide power from one battery or posi-
tion the Battery Switch to the “1+2” position to supply
power from both batteries.
Position the “DC MAIN” breaker switch on the BSP to
the “ON” position.
1.
2.
Position the “REFRIGERATOR” breaker switch to the
“ON” position.
To turn your refrigerator on, turn the fridge’s internal
temperature control knob clockwise to the desired
cooler level.
To turn your refrigerator off, turn the fridge’s internal
temperature control knob fully counterclockwise.
NOTE: If leaving the refrigerator on when away from the boat,
ensure the shore power cables are connected. (If equipped
with a battery charger, turn it on to prevent battery drain. If
equipped with an inverter, the batteries will automatically charge
if the AC panel is energized.)
NOTE: Consult the refrigerator manufacturer’s OEM manual for
fridge operation, care and maintenance.
7.3.2.10 Sump Pump Breaker
Once the DC panel is energized, the sump pump, or col-
lection box/pump system, is also energized. A 10 amp
reset breaker labeled “SUMP PUMP” protects it from a
power fault. The collection box/pump system serves to
automatically discharge grey water originating from the
vanity sink, shower and condensation from the optional
air conditioning system which all drain into the collection
box.
For additional details on the collection box/pump sys-
tem, please refer to the Waste Systems chapter of this
manual.
NOTE: Consult the pump manufacturers’ OEM manual for
instrument operation, care and maintenance.
7.3.2.11 Electric Toilet Breaker
Once the DC panel is energized, the optional electric toi-
let electrical components are also energized. A 25 amp
pop-out breaker labeled “HEAD” protects them from a
power fault.
For additional details on the toilet system, please refer to
the Waste Systems chapter of this manual.
NOTE: Consult the electrical toilet manufacturer’s OEM manual
for component operation, care and maintenance.
7.3.2.12 TV/DVD Breaker
This 10 amp reset breaker controls the optional video
entertainment components of your boat. The breaker is
labeled “TV/DVD” and protects the TV and DVD circuitry
3.
4.
5.