Marinediesel 5L V8, Руководство пользователя, Страница: 9 / 248

7
The raiser bolts on to the exhaust manifold using four metric (M10X30) stainless steel bolts,
torque to 30Nm using Loctite 518 sealant and high temp flange sealant on both sides of the
gasket. See picture below
Supercharger and Intercooler System
Air induction on Marinediesel SC-engines includes the following parts:
x
Air intake duct, intake silencer and air filter assembly
x
Supercharger assembly
x
Intake assembly with integrated CuNi intercooler
x
Crankcase ventilation system
Air intake duct and air filter assembly
Outside air enters the induction system through a filter located on the intake silencer inlet (see
picture below). This is a bonded cotton/wire mesh filter material and should be cleaned and
replaced according to service intervals (see service book). The air filter element mounts to the
intake silencer inlet with a clamp. The intake silencer mounts to the intake adaptor on the
supercharger with a hose and clamps as well as a bolted bracket by the air filter according to
pictures below.
Water passage gasket
Raiser bolts