Marinediesel 5L V8, Руководство пользователя, Страница: 217 / 248

Owners Manual 215 Section 7 - Engine
WIDE OPEN THROTTLE TEST
IMPORTANT: To operate engine at full throttle before the break-in period is
complete, follow this procedure.
x Start engine and operate at idle rpm until normal operating temperature is reached.
x Run boat up on plane.
x Advance engine rpm in 200 rpm increments, until engine reaches its maximum rated
rpm.
To test if the correct propeller has been installed, operate boat (with normal load on
board) at WOT and check rpm with an accurate tachometer. Engine rpm should be near
top of the specified range so that under a heavy load engine speed will not fall below
specifications. If engine speed is too high, replace propeller with a higher pitch propeller.
Normally, a
200-400 rpm change exists between propeller pitches.