Marinediesel 5L V8, Руководство пользователя, Страница: 155 / 248

153
NOTE: Items underlined are the most likely cause of the condition.
WILL NOT START - COLD
PROBLEM CORRECTION/FURTHER DIAGNOSIS
ƒ
Incorrect fuel quality (heating
energy/purity)
ƒ
Incorrect oil level (high/low) and quality
(grade/viscosity/purity)
ƒ
Operation during extreme ambient
temperature (hot/cold)
ƒ
Improper starting procedures
ƒ
Incorrect fuel supply to injection pump
ƒ
Incorrect automatic advance mechanism
operation
ƒ
Leaking fuel injection lines
ƒ
Faulty fuel injection nozzles
ƒ
Internal injection pump faulty (no high
pressure fuel delivery)
ƒ
Incorrect glow plug operation
ƒ
Slow cranking speed
ƒ
Check specific gravity of fuel (Use fuel
quality hydrometer). Inspect and clean fuel
tank, if needed.
ƒ
Remove or add oil to correct level. Drain
and refill crankcase, if needed.
ƒ
Review normal operation characteristics.
ƒ
Review correct use of glow plug system.
ƒ
Check fuel system for bleed-down.
ƒ
Consult your dealer service manager.
ƒ
Repair or replace leaking lines.
ƒ
Consult with your dealer service manger.
ƒ
Consult with your dealer service manger.
ƒ
Insure glow plugs are cycling properly.
ƒ
Check the following, if needed:
-Battery state-of-charge
-Cranking system operation
-Charging system operation
WILL NOT START – HOT
PROBLEM PROBLEM
ƒ
Incorrect fuel quality (low viscosity)
ƒ
Incorrect injection pump static timing
ƒ
Incorrect fuel supply to injection pump
ƒ
Hot start solenoid not activating
ƒ
Incorrect fuel quality (low viscosity)
ƒ
Incorrect injection pump static timing
ƒ
Check fuel system for air.
ƒ
Check that you have + to hot-start solenoid
on injection pump when starter is engaged.