Maretron DSM150, Руководство пользователя

Страница: 150 / 274

DSM150
User’s Manual
Page 134 Revision 1.4.18
Figure 133
– J2K100 NMEA 2000
®
PGN Enable/Disable Screen
You can enable or disable specific transmissions by scrolling
( or )
through the different
transmitted messages and pressing the Enter key ( ) on the message to be configured. Select
whether you want the message to be transmitted (“On”) or disabled (“Off”) using the Scroll Up (
)
or Scroll Down ( ) keys followed by the Enter key ( ).
6.17.1.6 Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.17.2 Device Label
A label may be assigned to the J2K100 as an aid to identifying the device over the network.
See section 3.3.4 for details on how to enter a textual value.
6.17.3 NMEA 2000 Instance
– Engine
This entry allows the engine to be mapped to an NMEA2000 instance number. Each engine on an
NMEA 2000
®
network must have a unique instance identifier, to allow display devices to distinguish it
from other engines on the network. The “NMEA2000 Engine Instance:” menu item allows you to
configure the engine instance identifier which will be sent over the NMEA 2000
®
network along with
engine-related NMEA 2000
®
messages. In order to configure this parameters, use the Scroll Up ( )
or Scroll Down (
) keys to move the highlighted cursor to the “NMEA2000 Engine Instance:” menu
item. Then, press the Enter key ( ) to move the highlight to the numeric value on the right, as
shown in Figure 134 below.
Because only one such mapping can take place, each engine on the J1939 network must have its
own J2K100 Gateway. The J1939 Source Address (see section 6.17.4) identifies the engine on the
J1939 network, the Engine Instance indentifies the engine to the NMEA2000 network.