MDE-3883 TRIND Retrofit Kits C00011-005
• 10/00
Page 5
Parts Lists
PRELIMINARY
FCC 11/30
C00011-005 Kits for The MPD-3 Series Units
Kit for MPD-3 units:
All C00012-005 kits for MPD-3 units contain the following parts except as noted
in the tables.
K96646-05 Kit for MPD-3 Units
K96646-05 Kits are configured as order entry for all MPD-3 units and contain the
following parts.
Kit
Bezel and Faceplate Type
Sides
C00012-005-MPDD
PMI Bezel with Slide-In Faceplate
2
C00012-005-MPDS
1
C00012-005-MPBD
Mack Bezel with Bolt-On Faceplate
2
C00012-005-MPBS
1
Description
Part Number
Quantity
bezel assembly
T20616-GX (see note 1)
1 per side
cable clamp, gray
Q13558-04
16
cable and accessory group
K96646-05
For components see table “K96646-05
Kit for MPD-3 Units” on page 5.
cable tie
Q10178-01
4
card cage assembly
T20606-G3 (see note 3)
1
graphics, bezel
MP02002G001
(see note 2)
grommet strip, solid
Q10315-01
1.5 ft.
jump jack
Q11011-01
4
kit, MPD-3 parts
K96646-05(
see table below)
label plate, FCC
N23949-06
1
manual, installation instructions
MDE-3883
1
nut
Q12068-03
2
screw, phillips 6-32
Q12083-13
1
screw, phillips 8-32
Q12083-26
2
Notes:
1. Bezels are order entry item. T20616-G1 bezel assemblies are configured for PMI (slide-in) faceplates; T20616-G2
bezel assemblies are configured for bolt-on (stud) Mack bezel units.
2. Bezel Graphics MP02002G001 are an order entry item.
3. Some kits may contain a T20606-G4 Card Cage. Only differences for installation consist of location of Gateway
board (on top of card cage in -G4 units, within card cage for -03 units) and card cage harness cables for connecting
to R20773-G2 door cables. All harness cable connections are identical between -G3 and -G4 card cages. See
“Addressing Gateway Board” on page 35.
Description
Part Number
Quantity
cable
R18163-G1
1
cable group
Q13863-05
Cable group contains the following parts:
• Gateway to CRIND logic R20437-G01, 1 ea.
• AC power R20580-G1, 1 ea.
1
manager keypad assembly
T17549-G1
1
