Introduction
Page 2
MDE-3883 TRIND Retrofit Kits C00011-005
• 10/00
PRELIMINARY
FCC 11/30
Related Documents
MDE-2531
Pump & Dispenser Start-Up & Service Manual
MDE-2562
CRIND Service Manual
MDE-2628
Cash Acceptor Retrofit Assemblies for The Advantage Series with
CRIND
MDE-2620
Graphics Panel Application for The Advantage Series
PT-1728
The Advantage Series Illustrated Parts Manual
PT-1736
CRIND Card Reader Illustrated Parts Manual
Required Tools
The following equipment is needed to install all TRIND™ Multi 1 kits:
• Allen wrench set, American standard
• clean cloth or rag
• chip extraction tool, e.g., IC extraction, Digikey Part No. K158-ND or
equivalent
• isopropyl alcohol (part# END-1082)
• needle nose pliers
• nut driver, 1/4'', 3/8''
• pocket knife
• Q12534 CRIND diagnostic card
• ratchet set, standard
• screwdrivers, flat and Phillips head
• static guard wrist strap
The following additional tools are required if kit is to be installed on wide
frame units with call or stop button on existing right options door:
• center punch
• deburring tool or round file
• hand drill, battery electric or pneumatic
• light hammer
• pilot drill bit (between 3/32” and 1/4”) and 7/8” drill bit
• standard tape measure or rule
