8724 V Tribrid NVR Installation Guide
42
Unit Setup
5
The module plugs into the connector at the bottom of each slot.
6
When you are sure that the module is securely plugged into the connector and is properly
seated, tighten the panel fasteners.
Note:
When tightening the panel fasteners, use 5.0 in-lbs (inch pounds) of torque.
7
Close and lock the door of the recorder unit.
Important:
If the new module you have just installed is an HDoC module, you must provision it
and manually add its channels using the Discovery Browser software (accessible from the
Administrator Console software).
For information on provisioning the HDoC modules, see the
8724 V Tribrid NVR - HDoC Module
User Guide
, available from the March Networks Partner Portal website.
Connector
in empty
slot
Bottom of video module
plugged into connector
Full view of a PoE module
plugged into the connector
2 panel fasteners
