8724 V Tribrid NVR Installation Guide
27
Feature Overview
Power Supply and Connection
There is a power supply module inside the unit, and a 120-240 volt AC connection located on the
bottom left of the unit.
To power down the unit, unplug the power supply from the wall.
If the unit only contains HDoC video input modules (no PoE modules), shutdown occurs
approximately 15 seconds after power is removed.
If the unit has a PoE video input module installed in any of the 3 slots, a loss of AC power causes
the unit to reboot immediately. After the reboot (unless power is restored) the unit shuts down.
For the unit’s power ratings, see “Specifications” on page 13.
120 - 240 volt AC connection
Power
Supply
(layout
Power
Supply
(photo,
right side)
drawing)
