20
Montage- und Betriebsanleitung
Installation and Operating Instructions
EN
33..44
W
Waarrrraannttyy
The warranty period is 2244 m
moonntthhss from the date of delivery ex works on condition
of use for the correct use and observance of the contents of the installation and
operating instructions.
The tool, including all associated components, must not be modified or used for
non-authorised applications. Any modification to the tool or any unauthorised
use will void all warranty claims against MAPAL.
MAPAL expressly declines any liability for accidents or damage resulting from the
use of damaged tools or damaged machine parts. Wear parts are not covered by
the warranty.
33..55
G
Geenneerraall w
waarrnniinnggss aanndd ssaaffeettyy iinnssttrruuccttiioonnss
W
WAARRN
NIIN
NG
G
DDaannggeerr ffrroom
m uussee bbyy uunnttrraaiinneedd aanndd uunnaauutthhoorriisseedd ppeerrssoonnnneell!!
The clamping of tools and their installation on a machine tool by untrained and
unauthorised personnel can lead to hazardous situations.
Only trained, authorised and dependable specialist personnel may clamp
tools and install them on a machine tool.
The technical data on the machine connection must be observed by the spe-
cialist personnel.
The specialist personnel must be able to recognise and avoid hazards.
CCAAU
UTTIIO
ON
N
SShhaarrpp ccuuttttiinngg eeddggeess oonn tthhee ttooooll!!
Sharp cutting edges may cause cutting injuries.
Wear protective gloves when changing indexable inserts.
N
NOOTTEE
DDaam
maaggee ttoo tthhee ttooooll iinnsseerrttss!!
If the tool is set down with the connection facing up, the tool inserts may be
damaged.
Do not set the tool down on the tool inserts.
IIN
NFFO
ORRM
MAATTIIO
ON
N
Only trained personnel are permitted to change the indexable inserts!
Montage- und Betriebsanleitung
Installation and Operating Instructions
21
EN
G
Geenneerraall iinnffoorrm
maattiioonn
44..11
VViieew
w ooff H
HPPRR550000
Individual components of the HPR500
LLeeggeenndd
1
| Precision guide pin
2
|
Cassette
3
|
HPR500 indexable insert
4
|
Adjusting screw
5
|
Adjusting wedge
6
| Clamping jaw
7
|
Threaded spindle
8
|
Ejection bores of the cassette
9
|
Adjustment bar
10
|
Threaded spindle bore
Montage- und Betriebsanleitung
Installation and Operating Instructions
21
EN
