Manitowoc Grove TMS9000-2 Series, Руководство по обслуживанию

Страница: 142 / 408

3-22
Published 01-14-2021 Control # 707-01
ELECTRICAL SYSTEM TMS9000-2 SERVICE MANUAL
Check
1. Squirt some cleaning fluid onto the windshield with the
windshield washer.
2. Make repairs if windshield washer doesn’t work.
REMOTE CONTROLLER (OPTIONAL)
The remote controller consists of the following:
• A hand held remote transmitter (1), (Figure 3-26)
• A receiver (2), (Figure 3-26) mounted behind the seat in
the carrier cab.
• A battery charger (3), (Figure 3-26).
• A second battery (4), (Figure 3-26). The other battery is
in the remote.
• The battery charger clip (5), (Figure 3-26) that holds the
charger in place.
Receiver
Removal
1. Tag and remove the cables from the receiver.
2. Remove the four screws holding the receiver to the
panel.
3. Remove the receiver.
Installation
1. Align the receiver’s four mounting holes with the holes in
the panel.
2. Install the four screws and tighten.
3. Connect the cables as tagged during removal.
Battery Charger
Removal
1. Unplug the wire from the battery charger.
2. Loosen the screw securing the battery charger clip (5).
3. Loosen the nuts securing the battery charger to the
panel.
4. Slide the battery charger up and remove it.
Installation
1. Hold head of screws, that secure the battery charger,
approximately 3 mm (0.13 in) off the panel and slide the
battery charger over the screw heads.
2. Secure the screws with the nuts.
3. Slide the battery charger clip down onto the battery
charger and secure with the screw.
4. Plug in the wire to the battery charger.
9479-1
FIGURE 3-26
5
Fo
r
Reference
Only