Manitou MT 1135 ST3B Скачать руководство пользователя

Страница: 67 / 159

2 - 36

PNEUMATIC DRIVER'S SEAT (OPTION)

DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.

WEIGHT AND SEAT HEIGHT ADJUSTMENT

WEIGHT ADJUSTMENT (FIG. A)

It is advised that you adjust the seat according to your weight when sitting.

- Switch on lift truck ignition.

- Push or pull lever 1 until green appears in display 2 indicating correct adjustment

according to your weight.

NOTE: To avoid any health problems, it is recommended that the weight should be

checked and adjusted before starting up the lift truck.

SEAT HEIGHT ADJUSTMENT (FIG. B)

IMPORTANT

To avoid causing any damage, do not activate the compressor for over 1 minute.

When weight adjustment has been carried out, you can then modify seat height.

- Keep the ignition on in the lift truck.

- Push or pull lever 1 until green appears and adjust the height of the seat while

checking that the green in display 2 remains visible.

SEAT BACK-REST ANGLE ADJUSTMENT (FIG. C)

The back-rest angle of the seat may be adjusted to suit the individual.

- Press the left-hand button while pushing on the seat or relaxing pressure on the

seat to find a comfortable position.

SEAT DEPTH ADJUSTMENT (FIG. D)

The depth of the seat may be adjusted to suit the individual.

- Press the right-hand button while raising or lowering the seat to find the desired

position.

EXTENDING THE HEAD-REST (FIG. E)

- The height of the back-rest can be adjusted by pulling it upwards (the notches will

click) up to the stop.

- The head-rest can be removed by applying sufficient pressure to pull it off the stop.

LUMBAR ADJUSTMENT (FIG. F)

This increases the comfort of the seat and the driver’s freedom of movement.

- Turn the handle either left or right to adjust the height or depth of the lumbar

support.

ADJUSTMENT OF THE ANGLE OF THE BACK-REST (FIG. G)

IMPORTANT

If you do not support the back-rest when making adjustments, it swings completely forwards.

- Support the back-rest, pull the lever and position the back-rest to find the desired

position.

647104

(13/06/2016)

835

/ 1135

/ 1335

ST3B

Содержание MT 1135 ST3B
































































































































































Результаты поиска

Содержание MT 1135 ST3B

Отзывы:

Похожие инструкции для MT 1135 ST3B

Бренды по названию

Популярные бренды

Manitou MT 1135 ST3B, Инструкция по эксплуатации

Результаты поиска

Содержание MT 1135 ST3B

Отзывы:

Похожие инструкции для MT 1135 ST3B

Бренды по названию

Популярные бренды