Manitou MT 1135 ST3B, Инструкция по эксплуатации

Страница: 119 / 159

3 - 16
B4 – GENERAL GREASING
GREASE
To be carried out weekly, if the lift truck has been operated for less than 50 hours during the week.
IMPORTANT
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this interval to 10 working hours or every day.
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) and remove the surplus
of grease.
BOOM
1 - Lubricators of the boom axle (2 lubricators).
2 - Lubricators of the carriage axle (2 lubricators).
3 - Lubricator of the tilt cylinder foot axle (1 lubricator).
4 - Lubricator of the tilt cylinder head axle (1 lubricator).
5 - Lubricator of the lifting cylinder foot axle (1 lubricator).
6 - Lubricator of the lifting cylinder head axle (1 lubricator).
7 - Lubricator of the compensation cylinder foot axle (1 lubricator).
8 - Lubricator of the compensation cylinder head axle (1 lubricator).
FRONT AND REAR WHEEL REDUCTION GEAR PIVOTS
9 - Lubricators of the wheel reduction gear pivot pins (8 lubricators).
AXLE OSCILLATION
10 - Front axle oscillation lubricators (2 lubricators).
MT 1135 ST3B / MT 1335 ST3B
11 - Rear axle oscillation lubricators (2 lubricators).
ROLL CORRECTOR
MT 1135 ST3B / MT 1335 ST3B
12 - Lubricator of the roll corrector cylinder foot axle (2 lubricators).
13 - Lubricator of the roll corrector cylinder head axle (1 lubricator).
STABILIZERS
MT 1135 ST3B / MT 1335 ST3B
14 - Lubricators of the stabiliser cylinders’ foot axle (2 lubricators).
15 - Lubricators of the stabiliser cylinders’ head axle (2 lubricators).
16 - Lubricators of the stabiliser axles (4 lubricators).
SINGLE SIDE-SHIFT CARRIAGE (TSDL) (OPTION)
17 - Wear plate lubricators (8 lubricators).
647104
(13/06/2016)
MT
835
/ 1135
/ 1335
ST3B