Manitou MT 1135 ST3B, Инструкция по эксплуатации

Страница: 150 / 159

4 - 5
INTRODUCTION
- Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
- A wide range of attachments, specially designed and perfectly suitable for your lift truck is available and guaranteed by
MANITOU.
IMPORTANT
Only attachments approved by MANITOU are to be used on our lift trucks
(see: 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE: TECHNICAL SPECIFICATIONS OF ATTACHMENTS).
The manufacturer’s liability will be denied in case of modification or of attachment adaptation carried out without his knowing it.
- The attachments are delivered with a load chart concerning your lift truck. The operator’s manual and the load chart
should be kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions
contained on this notice.
IMPORTANT
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s mass and centre of gravity.
In the event of the attachment having less capacity than the lift truck, never exceed this limit.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
IMPORTANT
Depending on their size, certain attachments may, when the boom is lowered and retracted, come into contact with the front tyres and cause damage to them, if reverse
tilt is activated in the forward tilt direction.
TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
SUSPENDED LOAD
IMPORTANT
Suspended load MUST be handled with a lift truck designed for that purpose
(see: 1 - OPERATING AND SAFETY INSTRUCTIONS: LOAD HANDLING INSTRUCTIONS: H - TAKING-UP AND SETTING-DOWN A SUSPENDED LOAD).
USE THE SINGLE SIDE-SHIFT CARRIAGE
IMPORTANT
The single side-shift carriage (TSDL) is only compatible with the following attachments:
• floating fork carriage (TFF)
• tilting fork carriage (PFB)
• loading bucket (CBR)
• concrete bucket (BB, BBG)
• spout bucket (GL)
• crane jib and crane jib with winch (P, PT, PO, PC)
• winch (H)
• fixed platform, swivelling platform, roofer’s platform.
It is prohibited to use any other attachments on the TSDL.
If it is being used with a loading bucket (CBR), the single side-shift carriage MUST be centred and no side-shift operations performed.
Attachments authorised for use on the TSDL must comply strictly with the applications for which they are designed.
It is prohibited to use them for any other application (for example, earth moving, excavation, desurfacing, back scraping, etc. for the loading bucket CBR) or any
application placing abnormal stress on the structure of the TSDL: risk of deformation which could cause the load to fall.
USE THE BUCKETS
IMPORTANT
The MT 835 ST3B, MT 1135 ST3B and MT 1335 ST3B, are lift trucks essentially intended for handling. Occasional use with the buckets CBC/CBR/CB4x1 is authorised (only
with the boom completely retracted, in order to reduce stress on the boom head), but under no circumstances is intensive use for difficult applications (quarry, waste,
cereals, agriculture, etc) permissible.
647104
(13/06/2016)
MT
835
/ 1135
/ 1335
ST3B