manualshive.com logo in svg

Manitou MT 1135 ST3B, Инструкция по эксплуатации

Поделиться
Скачать
Manitou MT 1135 ST3B Скачать руководство пользователя страница 65

2 - 34

1 - DRIVER'S SEAT

DRIVER’S SEAT (STANDARD)

DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.

LONGITUDINAL ADJUSTMENT

 

- Unlock the locking lever 1.

 

- Slide the seat to the desired position.

 

- Release the lever and be sure it returns to the lock position.

SEAT SUSPENSION ADJUSTMENT

 

- Refer to the seat's graduation.

 

- Turn knob 2 according to the driver's weight.

ANGLE ADJUSTMENT OF THE BACK-REST

 

- Pull the locking lever 3 upwards.

 

- Tilt the back-rest to the required position.

 

- Release the lever and be sure it returns to the locking position.

1

2

4

3

2

3

1

DRIVER'S SEAT (OPTION)

DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.

LONGITUDINAL ADJUSTMENT

 

- Pull the locking lever 1 upwards.

 

- Slide the seat to the desired position.

 

- Release the lever and be sure it returns to the lock position.

SEAT CUSHION ADJUSTMENT

The front and the back of the seat cushion can be adjusted separately.

 

- To adjust the front, push the lever 2 downwards.

 

- Release it into one of the five possible positions.

 

- Same procedure to adjust the back by pulling the lever 2 upwards.

SEAT SUSPENSION ADJUSTMENT

 

- Turn the button 3 and adjust according to your weight.

ANGLE ADJUSTMENT OF THE BACK-REST

 

- Lean the back against the back-rest.

 

- Pull the lever 4 and place the back-rest into one of the possible positions.

DRIVER'S SEAT (OPTION)

DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.

WEIGHT ADJUSTMENT (FIG. A)

It is advised that the weight be adjusted when the driver is not sitting in the cab.

 

- Refer to graduation 1 of the seat.

 

- Turn knob 2 according to the driver's weight.

NOTE:  To avoid any health problems, it is recommended that the weight should be 

checked and adjusted before starting up the lift truck.

SEAT HEIGHT ADJUSTMENT (FIG. B)

 

- Raise the seat to the desired position, until you hear the ratchet click. If you raise 

the seat above the last notch (stop), the seat returns to the lowest position.

B

A

2

1

647104 

(13/06/2016) 

MT 

835 

/ 1135 

/ 1335  

ST3B

Содержание MT 1135 ST3B
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды