Mandik FDMR, Инструкции по установке, эксплуатации, техническому обслуживанию и ремонту

Страница: 99 / 101

Page 99 Version 2023-06-15 Fire damper - FDMR
TPM 140/19
Damper design Additional digit
Manual control and thermal .01
Manual control and thermal (Zone 1,2) .02
Manual control and thermal with a terminal switch („CLOSED“) .11
Manual control and thermal with a terminal switch („CLOSED“) (Zone 1,2) .12
Manual control and thermal with two terminal switches („OPEN“, „CLOSED“) .80
Manual control and thermal with two terminal switches („OPEN“, „CLOSED“) (Zone 1,2) .81
With actuator BF 230-TN (BFL, BFN 230-T) - voltage AC 230 V .40
With actuator BF 24-TN (BFL, BFN 24-T), with smoke detector ORS 142 K and with supply device BKN 230-24-MOD
(voltage AC 230 V)
.41**
With actuator ExMax-15-BF, with thermoelectric activation device ExPro-TT (Zone 1,2) - supply voltage range 24 to 230
VAC/DC
.42
With actuator BF 24-TN (BFL, BFN 24-T) - voltage AC/DC 24 V .50
With actuator BF 24-TN (BFL, BFN 24-T), with smoke detector ORS 142 K (voltage AC/DC 24 V) .51**
With communication and supply device BKN 230-24 and actuator BF 24-TN-ST (BFL, BFN 24-T-ST) .60
With communication and supply device BKN 230-24-C-MP, with actuator BF 24-TN-ST (BFL, BFN 24-T-ST) .61
With communication and supply device BKN 230-24-C-MP, with actuator BF 24-TN-ST (BFL, BFN 24-T-ST) and with smoke
detector ORS 142 K
.61S**
With communication and supply device BKN 230-24MP and with actuator BF 24TL-TN-ST (Top-Line) for connection to
MP-Bus
.62
With communication and supply device BKN 230-24-MOD, with actuator BF 24-TN-ST (BFL, BFN 24-T-ST) .63
With communication and supply device BKN 230-24-MOD, with actuator BF 24-TN-ST (BFL, BFN 24-T-ST) and with smoke
detector ORS 142 K
.63S**
X. ORDERING INFORMATIONS
Ordering key
* For DN 350 only spiro design SL or SK can be ordered.
** The smoke detector is not part of the damper in the case of dampers in diameters from DN 100 mm to DN 200 mm (including). The
smoke detector is supplied separately.
■
If dampers with installation frame are required, that must be specified separately in the order. The installation frame can be installed on
the damper or delivered separately.
■
Detailed information for ATEX dampers (ZONE 1,2) → see Appendix
Fire damper
EXAMPLE:
FDMR SL 200 .40
- SL - spiro damper with rubber sealing, 200 - damper diameter, .40 - design
FDMR SL 200* .40
damper diameter
design
P - with round duct flange
PK - with round duct flange and installation brackets
SL - spiro damper with rubber sealing
SK - spiro damper with rubber sealing and installation brackets