Malibu Boats AirMAX 240, Инструкция по установке и настройке

Страница: 59 / 82

Configuration Troubleshooting
53
Installation and Configuration
3
Configuration
Ethernet works,
but the radio
modem does not If you can Ping the CPE or BTS from
the LAN side, but a PC on another
CPE or BTS within the cell area cannot
Ping it, then its radio modem may not
be working. Enter the IP number of the
suspected CPE/BTS from a PC
browser attached to its local LAN and
then if the AirMAX configuration pages
load up, then verify it has a matching
SSID value, verify the CELL ID as
reported by the BTS is detected by the
CPE, check signal strength, ensure
power level is at maximum, and if
those measures don t remedy the
problem, then try rebooting the CPE/
BTS.
Also, verify that a subscriber and
appropriate rule(s) have been
configured for that CPE (see
QoS
Management From the BTS ,
presented earlier in this Chapter)
Table 3. Symptom and Remedy Actions
Symptom or
Condition
Remedy or Action