Malibu Boats AirMAX 240, Инструкция по установке и настройке

Страница: 57 / 82

Configuration Troubleshooting
51
Installation and Configuration
3
Configuration
3. In the DOS window type:
>ping 192.168.1.1
RETURN
The ping utility will then send test data packets to
192.168.1.1 the factory default AirMAX IP and
measure the time it takes to respond. It also checks
whether there is any data loss in the loop. You can use
Ping to test any IP address on your LAN or wireless
connection.
Note:
if you ve changed the IP address from the factory
default value, then correspondingly change the IP address in
the ping parameter shown above.
Figure 3-15. DOS Window Showing Ping Utility
If the Ping times out or reports excessive data loss,
then re-check your cabling and ensure there is power to
the AirMAX Power Injector. If the IP still won t Ping, read
the
Symptom and Ready table shown next.